Busan Gangseo-gu Factory: Analysis of 1.1-ton Steel Plate Fall Fatality
A worker in their 40s died at a factory in Gangseo-gu, Busan, when a 1.1-ton steel plate, suspended by a hoist, fell after its safety latch disengaged during welding work. Police are investigating the cause of the hook safety latch disengagement and compliance with heavy object handling safety regulations.
Incident Overview
| Item | Content |
|---|---|
| Date | Approximately 8:43 AM on November 10, 2026 |
| Location | A factory in Gangseo-gu, Busan |
| Incident Type | Heavy object fall (hoist hook safety latch disengagement) |
| Damage | 1 worker in their 40s deceased |
Key Cause Analysis
Q. Why did this accident occur?
- Equipment: The steel plate fell when the safety latch of the hook connected to the hoist, the equipment used to lift the steel plate, disengaged. The cause is presumed to be a defect or deterioration of the safety latch itself, or an improper fastening condition.
- Management: It was not confirmed whether the safety device (hook safety latch) operated correctly during the handling of the heavy object, or whether related safety rules were observed. There is a possibility of inadequate safety checks before work or negligence in safety management during work.
Reasons for Danger in the Field
In actual workplaces, during heavy object handling, safety latches are often neglected for the sake of work speed, or deteriorated equipment is used without inspection. In particular, the hook safety latches of heavy object transport equipment such as hoists and cranes are often difficult to visually inspect or fail to function properly due to wear. Furthermore, when other work (such as welding) is performed simultaneously beneath a heavy object, a lack of awareness of the fall risk or inadequate setting of safety zones further increases the risk of accidents.
Prevention Checklist
- Before work, always check and record the operating status of hook safety latches on heavy object transport equipment such as hoists and cranes.
- If abnormalities such as wear or deformation of the safety latch are found, immediately stop use and replace or repair it.
- During heavy object lifting operations, strictly control the entry of other workers within the working radius and establish a safety zone.
- If other work, such as welding, must be performed beneath a heavy object, ensure the heavy object is securely supported before proceeding with the work.
- Conduct regular safety training for workers handling heavy objects and related workers to increase risk awareness.
- Establish and implement a plan for regular maintenance and safety inspections for all heavy object handling equipment.
Related Laws
- Occupational Safety and Health Act (South Korea) Article 38: Employers shall take necessary measures to prevent dangers caused by harmful or dangerous machinery, tools, and facilities.
- Serious Accidents Punishment Act (South Korea) Article 4: Business owners or responsible management personnel shall fulfill their duty to secure safety and health to prevent harm or danger to workers in the workplace.