Geoje Yeoncho Shipyard: Foreign Worker in His 40s Dies After Falling
On November 13, 2026, a Thai worker in his 40s died after falling approximately 5m from a work scaffold at a shipyard in Yeoncho-myeon, Geoje-si. At the time of the accident, he was assembling the ship's upper structure, and the police are investigating the exact circumstances of the accident. The application of the Occupational Safety and Health Act and the Serious Accidents Punishment Act will also be investigated.
Incident Overview
| Item | Content |
|---|---|
| Date and Time | Approximately 6:24 PM on November 13, 2026 |
| Location | Shipyard workplace in Yeoncho-myeon, Geoje-si |
| Accident Type | Fall |
| Victim | One male worker in his 40s, Thai national, deceased |
Key Cause Analysis
Q. Why did this accident occur?
- Human: Not mentioned in the article (Presumed: Worker's carelessness or non-compliance with safety rules possible)
- Equipment: Fall from a work scaffold approximately 5m high. Need to confirm the installation status of the scaffold or the lack of safety devices (safety railings, work platforms, etc.).
- Environment: Not mentioned in the article (Presumed: Environmental factors during work such as lighting, weather, etc.)
- Management: Presumed to have fallen during assembly work, such as installing brackets for the ship's upper structure, but specific work details and circumstances of the fall require further confirmation. Possible contributing factors include whether personal protective equipment such as safety harnesses were provided and their use instructed, whether pre-work safety education and risk assessments were conducted, and whether there was negligence in work supervision and direction.
Why it is dangerous in the field
In actual workplaces, especially in shipyards, work is often performed at heights, posing a constant risk of falls. Particularly during scaffolding work, the sturdiness of the scaffold installation, the safety of the work platform, and the presence of safety railings are extremely important. Workers must wear safety harnesses and attach them to safety hooks during high-altitude work, but they often overlook this due to convenience or familiarity with the work. Additionally, in the case of foreign workers, language barriers may prevent safety education content from being sufficiently delivered, or their ability to recognize and respond to dangerous situations may be insufficient, requiring special attention and education.
Prevention Checklist
- Conduct a risk assessment before work and share and communicate the results to workers.
- Thoroughly implement fall prevention measures, such as installing safety railings and fall protection nets, for work at heights of 2m or more.
- Work scaffolds must be securely installed according to safety standards, work platforms must be installed without gaps, and safety railings must be installed.
- Provide safety harnesses to workers for high-altitude work, make it mandatory to attach safety hooks, and have supervisors thoroughly check this.
- Provide sufficient safety education on work content and risk factors to all workers, including foreign workers, and confirm their understanding.
- Appoint a work supervisor to oversee compliance with safety rules throughout the work.
- Establish and educate emergency procedures to immediately stop work and take safety measures in the event of an unexpected situation during work.
Related Laws
- Article 38 of the Occupational Safety and Health Act (South Korea): Matters concerning safety measures in places with a risk of falling.
- Article 4 of the Serious Accidents Punishment Act (South Korea): Matters concerning the duty of business owners or responsible management personnel to secure safety and health.
