Taeyoung Engineering & Construction Site: Worker Dies from Machine Entrapment During Work
A worker died from machine entrapment while separating a concrete paving equipment track turnbuckle at a Taeyoung Engineering & Construction expressway construction site. This was the second fatal accident at a Taeyoung Engineering & Construction site within approximately 10 days, leading the Ministry of Employment and Labor to issue a partial work suspension order and investigate the accident's circumstances.
Incident Overview
| Item | Content |
|---|---|
| Date | November 16, 2026 |
| Location | Expressway No. 400 Yangpyeong~Icheon Construction Project, Section 4 Site |
| Accident Type | Entrapment |
| Damage | 1 worker deceased |
Major Cause Analysis
Q. Why did this accident occur?
- Human: It is presumed that safety procedures were not followed or there was carelessness during the track turnbuckle separation work. (No specific details in the article)
- Equipment: Despite the risk of entrapment between the track cylinder and the main body of the concrete paving equipment, it is unclear whether protective measures or safety devices for this risk were in place or activated.
- Environment: No specific environmental factors were mentioned in the article.
- Management: Insufficient risk assessment and safety work plan establishment before work, lack of work supervision and direction, and inadequate safety training are presumed causes. In particular, the recurrence of a fatal accident at the same construction company within approximately 10 days suggests problems with the overall safety management system.
Why it is Dangerous on Site
In actual construction sites, during equipment movement or component separation work, safety rules are often overlooked due to prioritizing work efficiency or familiarity. Especially with large equipment, movements can be extensive and unpredictable, meaning even minor carelessness can lead to fatal accidents. Furthermore, if there is a lack of clear safe work procedures and training for areas with entrapment risks due to the structural characteristics of the equipment, there is a high risk of similar accidents recurring.
Prevention Checklist
- Thoroughly conduct risk assessments before work and establish measures to eliminate or control hazards.
- Strictly adhere to standard operating procedures (SOP) during equipment movement and component separation work.
- Install safety guards on equipment parts with entrapment risks and regularly check their functionality.
- Provide sufficient training to workers on the risks and safety rules of the specific task before work begins.
- Work supervisors must conduct safety checks before work and strictly supervise adherence to safety rules during work.
- Devise safe work methods, such as working in pairs, and ensure familiarity with emergency response procedures.
Related Laws
- Occupational Safety and Health Act (South Korea) Article 38: Employers shall take measures to prevent dangers from harmful or dangerous machinery, equipment, and facilities.
- Serious Accidents Punishment Act (South Korea) Article 4: Business owners or responsible management personnel, etc., may be punished if they cause a serious industrial accident by violating their safety and health securing obligations.
